WolfVision visualisers have been used in all teaching rooms in the Phase 3 extension. Other rooms have Samsung visualisers, which are similar in operation.

Set up

1. Open up the Visualiser (image below) if not already done

2. Turn the Visualiser on using the button marked ‘Power’ on the body of the device
   
   

Procedure (simple)

1. Place your material on the Visualiser plate

2. Touch the lectern control panel if it is not already lit. You should see a screen giving 5 possible output sources. If not press the main button.

3. Select Visualiser as your output device

4. Your material should now be projected to your audience (it can take a minute for the projector to warm up)

5. You can zoom by rotating the wheel (#25 in the image below)

6. It is recommended you leave Auto Focus on (#27)

7. You can freeze/unfreeze an image (#28) allowing you to prepare the next slide before removing the previous image