Skip to main content

Robots find regular teeth brushing helps them munch through 50,000 aluminium spot welds

Paul Briskham
Paul Briskham with robot welder
print quality picture
New automated polishing process produces 50,000 high quality resistance
spot aluminium welds on just one set of electrodes

Resistance spot welding research by Paul Briskham at the University of Warwick's Warwick Manufacturing Group in conjunction with Douglas Boomer of Innoval Technology and engineers from Jaguar and Land Rover has achieved a landmark result of 50,000 high quality welds on automotive-grade aluminium sheet using just one set of standard copper electrodes on an automated robotic welding system.

The remarkably long electrode life was achieved by polishing the copper electrodes during the brief gap in time between each welded component.

Resistance spot welding is the most widely used process for joining steel sheet in the automotive industry, largely because it is the most cost-effective method for high-volume production and excellent at pulling together components prior to welding. However, a major hurdle preventing the adoption of this joining process for aluminium automotive sheet has been the problem of short electrode life and associated loss of weld quality.

Previous studies have shown that the electrode life can be extended to a few thousand welds by regular tip dressing using a form-cutter, of the type commonly deployed to maintain the electrodes when welding galvanized or high-strength steels.

This resistance spot welding study has also investigated low-cost methods for detecting electrode damage to determine automatically when to conduct electrode maintenance and when to change the electrodes, which could lengthen the electrode life even further.

Additional pictures

Paul Briskham
Paul Briskham
print quality picture
Paul Briskham
Paul Briskham
Print quality picture
Note for Editors: This research was conducted as part of the Premier Automotive Research & Development programme, with funding from Advantage West Midlands and industrial support from Jaguar, Land Rover, Innoval Technology, Novelis, AMDP tip dressing, Aro-Welding, Bosch-Rexroth, Matuschek and Comau Robotics.

For further information please contact:

Peter Dunn, Press and Media Relations Manager,
Communications Office, University of Warwick, 02476 523 708 or 07767 655860

PR61 PJD 11th September 2006