Skip to main content

Methods for Reducing the Cost of Cementitious Building Components in Developing Countries, with Particular Reference to Rainwater Harvesting

Gwilym T. Still

A thesis submitted in partial fulfilment of the requirements of Doctor of Philosophy in Engineering (2007)

Cementitious building components, although widely used in low-income countries, are too expensive for many applications related to low-income housing. This thesis explores three options for reducing component cost:

  1. Use of local fine aggregates, often with clay contamination, instead of low-fines sands transported from a distance.
  2. Improved designs, to achieve better material economy.
  3. Change of production environment, from on-site to component prefabrication followed by transport to site.

Water storage tanks for rainwater harvesting were used as the example for component design, and as a case-study for considering the effect of changing the production environment. The work showed that:

  • In some cases, use of local aggregates will give a cost saving of around 10%.
  • Improved design can give significant reduction in materials usage, of up to 40%.
  • Off-site prefabrication of components, followed by on-site assembly to produce the desired product, does not seem preferable to the prevelant practice of entirely on-site production from raw materials. However, factory-based manufacture of complete products, followed by transport to site, has a number of attractions over entirely on-site production.

Out of the three options examined, improved component design offers the greatest benefits for the case study considered.

Keywords: Rainwater harvesting, cement, tank, clay-contamination, developing countries.

 

Full Document (280pp,30Mb) (PDF Document)