Bagheri Sabbagh, A., Chan, T-M. and Mottram, J. T.(2013). Detailing of I-beam-to-CHS column moment joints with external diaphragm plates by FEA for seismic actions, Journal of Constructional Steel Research, 88, 21–33. ISSN: 0143-974X doi.org/10.1016/j.jcsr.2013.05.006
Nguyen, T. T., Chan T. M. and Mottram, J. T. (2013). Influence of boundary conditions and geometric imperfections on establishing lateral-torsional buckling resistance of a pultruded FRP I-beam by finite element analysis, Composite Structures, 100 (June) (online 10th February 2013). ISSN: 0263-8223 http://dx.doi.org/10.1016/j.compstruct.2012.12.023WRAP green access
Qureshi, J. and Mottram, J. T. (2013). Response of beam-of-column web cleated joints for pultruded frames, Journal of Composites for Construction, ISSN 1090-0268 doi:10.1061(ASCE)CC.1943-5614.0000392
Tzimas A.S., Karavasilis T.L., Bazeos N., Beskos D.E. (2013). "A hybrid force/displacement seismic design method for steel building frames" Engineering Structures, in press
Dimopoulos A.I., Karavasilis T.L., Vasdravellis G., Uy B. (2013). "Seismic design, modelling and assessemnt of self-centering steel frames using post-tensioned connections with web hourglass pins" Bulletin of Earthquake Engineering, in press
Vasdravellis G., Karavasilis T.L., Uy B. (2013). "Finite element models and cyclic behaviour of self-centering steel post-tensioned connections with web hourglass pins" Engineering Structures, Vol. 52:1-16.
Vasdravellis G., Karavasilis T.L., Uy B. (2013). “Large-scale experimental validation of steel post-tensioned connections with web hourglass pins” Journal of Structural Engineering (ASCE), Vol. 139(6):1033-1042.
Laory, I., Trinh, T., Posenato, D., and Smith, I. (2013). "Combined Model-Free Data-Interpretation Methodologies for Damage Detection During Continuous Monitoring of Structures." Journal of Computing in Civil Engineering, 10.1061/(ASCE)CP.1943-5487.0000289.(online)
Sheehan, T., Dai, X. H., Chan, T. M. and Lam, D. (2012). Structural response of concrete-filled elliptical steel hollow sections under eccentric compression. Engineering Structures 45, pp 314 – 323.
Laory, I., Hadj Ali, N., Trinh, T., and Smith, I. (2012). Measurement System Configuration for Damage Identification of Continuously Monitored Structures. Journal of Bridge Engineering. 17, SPECIAL ISSUE: Nondestructive Evaluation and Testing for Bridge Inspection and Evaluation, 857-866.
Pearson, I. T. and Mottram, J. T. (2012). Finite Element Modelling Methodologyfor the Non-Linear Stiffness of Adhesively Bonded Single Lap-Joints. Part 2. Novel Shell Mesh to Minimise Analysis Time, Computer and Structures. 90-91, 89-96. ISSN 0045-7949 doi:10.1016/j.compstruc.2011.10.006 WRAP green access
Pearson, I. T. and Mottram, J. T. (2012). Finite Element Modelling Methodologyfor the Non-Linear Stiffness of Adhesively Bonded Single Lap-Joints. Part 1. Evaluation of Key Parameters. Computer and Structures, 90-91, 76-88. ISSN 0045-7949 doi:10.1016/j.compstruc.2011.10.005 WRAP green access
Chen, C., Ricles, J. M., Karavasilis, T. L., Chae, Y. and Sause, R. Real-Time Hybrid Simulation System for Performance Evaluation of Structures with Rate Dependent Devices Subjected to Earthquake Loading. Engineering Structures, in press.
Evernden, M. C. and Mottram, J. T. (2012).A Case for Houses in the UK to be Constructed of Fibre Reinforced Polymer Components. Construction Materials, 165 1, 3-13.
Zafari, B. and Mottram, J. T. (2012). Affect of Hot-Wet Aging on the Pin-Bearing Strength of a Pultruded Material with Polyester Matrix. Journal of Composites for Construction, 16 3, 340-352. ISSN 1090-0268 doi:10.1061/(ASCE)CC.1943-5614.0000258 WRAP green access
Karavasilis, T. L., Kerawala, S. and Hale, E. Hysteretic Model for Steel Energy Dissipation Devices and Evaluation of a Minimal-Damage Seismic Design Approach for Steel Buildings. Journal of Constructional Steel Research, in press.
Whittle, J., Williams, M. S., Karavasilis, T. L., Blakeborough, T. A. Comparison of Viscous Damper Placement Methods for Improving Seismic Building Design. Journal of Earthquake Engineering, in press.
Mottram, J. T. (2011) Does Performance Based Design with Fibre Reinforced Polymer Components and Structures Provide any new Benefits and Challenges? The Structural Engineer, 89 (6), 23-27.
Mottram, J. T. and Zafari, B. (2011) Pin-Bearing Strengths for Design of Bolted Connections in Pultruded Structures. Structures and Buildings, 164 (5), 291-305. ISSN 0965-0911 doi:10.1680/stbu.2011.164.5.291 WRAP green access
Lewis, W. J. (1999) Lightweight Tension Structures - an Aesthetic Integration of Geometry and Mechanics. Part II - Finding the Form of Minimal Surface. Mathematics Today (the IMA Bulletin), 35, (3), 80 - 84.
Scudder, L. P., Hutchins, D. A. and Mottram, J. T. (1994) The Ultrasonic Impulse Response of Unidirectional Laminates. Ultrasonics, 32 (5), 347-357.
Bunn, P. and Mottram, J. T. (1993) Manufacture and Compression Properties of Syntactic Foams. Composites, 24 (7), 565-571.
Chow, T. M., Hutchins, D. A. and Mottram, J. T. (1993) Simultaneous Acoustic Emission and Ultrasonic Tomographic Imaging in Anisotropic Polymer Composite Material. Journal of Acoustical Society of America, 94 (2), Pt. 1, 944-953.
Mottram, J. T. (1993) Short- and Long-Term Structural Properties of Pultruded Beam Assemblies Fabricated using Adhesive Bonding. Composite Structures, 25 (1-4), 387-395.
Mottram, J. T. (1993) Recommendations for the Otimum Design of Pultruded Frameworks. Mechanics of Composite Materials, 29 (5), 675-682.
Anthony, D. M., Hines, E. L., Hutchins, D. A. and Mottram, J. T. (1992) Ultrasonic Tomography Imaging of Defects using Neural Networks. Neural Computation, 4 (5), 684-697.
Mottram, J. T. (1992) Design Charts for the Thermal Conductivity of Continuous Fibre-Reinforced Composites. Materials & Design, 13 (5), 279-284.
Mottram, J. T. (1992) Design Charts for the Thermal Conductivity of Particulate Composites. Materials & Design, 13 (4), 221-225.
Mottram, J. T. (1992) Lateral-Torsional Buckling of a Pultruded I-beam. Composites, 23 (2), 81-92.
Mottram, J. T. (1992) Lateral-Torsional Buckling of Thin-Walled Composite I-beams by the Finite Difference Method. Composites Engineering, 2 (2), 91-104.
Mottram, J. T., Geary, B. and Taylor, R. (1992) Thermal Expansion of Phenolic Resin and Phenolic/Silica- and Carbon-Fibre Composites. Journal of Material Science, 27, 5015-5026.
Mottram, J. T. (1991) Flexural Testing of General Multi-Layered Composites. Journal of Composite Materials, 25 (9), 1108-1126.
Mottram, J. T. (1991) Evaluation of Design Analysis for Pultruded Fibrereinforced Box Beams. The Structural Engineer, 69 (11), 211-220.
1990 and before
Mottram, J. T. and Johnson, R. P. (1990) Push Tests on Studs Welded through Profiled Sheeting. The Structural Engineer, 68 (10), 187-193.
Mottram, J. T. (1989) High-Order Analysis of Generally Symmetrical Laminated Plates under Transverse Loading. Composite Structures, 12 (3), 211-237.
Mottram, J. T. and Taylor, R. (1987) Thermal Conductivity of Fibre-Phenolic Resin Composites. Part I: Thermal Diffusivity Measurements. Composites Science and Technology, 29, 189-210.
Mottram, J. T. and Taylor, R. (1987) Thermal Conductivity of Fibre-Phenolic Resin Composites. Part II: Numerical Evaluation. Composites Science and Technology, 29, 211-232.
Mottram, J. T. (1987) A Simple Non-Linear Analysis of Multi-Layered Rectangular Plates. Computers and Structures, 26 (4), 597-608.
Mottram, J. T. and Selby, A. R. (1987) Bending of Thin Laminated Plates. Computers and Structures, 25 (2), 271-280.